Carrinho  |  Contato  |  Suporte  | 
Atendimento e Vendas 0800-773-2874

 - Discontinued Wall Mount Ultrasonic Flowmeter

FDT21W Series

Ultrasonic Flow Meter | Wall Mount | FDT21W Series

Ultrasonic Flow Meter | Wall Mount

imagem meramente ilustrativa

R$20.915,00 FDT-21W

1 ano de garantia CE
  • Accuracy 1%
  • Repeatability 0.2%
  • Positive, Negative and Net Totalizer
  • 2-Line LCD Display
  • Clamp On Transducers
  • RS485 Output
Ultrassônicos por Efeito Doppler / Tempo de Trânsito - Ver Produtos Relacionados


See FDT-25W as a direct replacement.

FDT-21W ultrasonic flowmeter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a measurement system which is both easy to install and use. The FDT-21W operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next. Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. The FDT-21W can be used for metallic, plastic and rubber tubes.

Accuracy: ±1% of reading >(0.2 m/s) 0.6 ft/s
Repeatability: 0.2%
Linearity: 0.5%
Response Time: 0 to 999 seconds (user configured)
Velocity: (±0.01 to 30 m/s) ±0.03 to 105 ft/s bi-directional
Temperature Range:
    Standard: 0 to 160°C (32 to 320°F)
Pipe Size: DN 20 to 100 mm (0.75 to 4") standard [up to DN 6000 mm (236") with optional transducers]
Transducer Frequency: 1 MHz
Rate Units (User Configured): Meter, feet, cubic meter, cubic feet, USA gallon, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons
Totalizer: 7-digit totals for positive, negative and net flow
Liquid Types: Most liquids including clean water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, and more
Suspension Concentration: ≤20,000 ppm (may contain very small amounts of air bubbles)
Pipe Material: All metals, most plastics and fiberglass
Security: Programmable lock-out code
Display: 2 x 16 english letters
Power: 85 to 264 Vac
Communications: RS485 (baud rate from 75 to 115,200 bps)
Transducer Cable Length: 5 m (15')
Data Logger: Built-in, stores over 2000 lines of data
Totalizer/Calibration: 7-digit press-to-go for calibration
Housing: ABS plastic with aluminum alloy protective carrying case
Case: NEMA 4 (IP65)
Dimensions: 29 H x 20 W x 9 cm D (11.5 x 8 x 3.5")
Weight: 514 g (1.2 lb)
Ver Modelos e Preços(Especifique o número do modelo)

O que outras pessoas compraram: Quando você vir este ícone, clique nele para expandir a lista de produtos que outras pessoas tenham comprado quando compraram este modelo.

Código de Produto/Desc.
Quick Ship
Disponível em: 6 semanas
Wall mount transit-time ultrasonic flowmeter (Includes S2H transducer)
Quick Ship
Disponível em: Em estoque
Replacement small pipe transducer
Quick Ship
Disponível em: Em estoque
Medium pipe transducer
Quick Ship
Disponível em: Em estoque
Large pipe transducer
Quick Ship
Disponível em: Em estoque
(Replacement) Transducer pipe clamp set for up to DN100 (4")
Quick Ship
Disponível em: Em estoque
Transducer pipe clamp set for up to DN200 (8")
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comFDT-21-CLAMP3
Disponível em: 7 semanas
Transducer pipe clamp set for up to DN300 (12")
Quick Ship
Disponível em: 6 semanas
Transducer pipe clamp set for up to DN400 (16")
Quick Ship
Disponível em: Em estoque
Transducer pipe clamp set for up to DN500 (20")
Quick Ship
Disponível em: Em estoque
Transducer pipe clamp set for up to DN600 (24")
Preços indicados em Reais e já incluem todos os impostos e taxas de acordo com a legislação vigente. Nota: Comes complete with standard size high temperature transducers (S2H), M2 memory storage card, transducer cable (2 @5m), transducer clamps (DN100) , allen(hex) wrench, 10 terminal spade lugs, shrink tubing and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.