A Omega Engineering lançou as séries FPD3000, FPD3100, FPD3200 e FPD3300 de medidores de vazão tipo deslocamento positivo.
Estas séries são acessíveis e precisas e possuem uma característica principal que é a capacidade de manter uma precisão consistente, apesar de mudanças nas condições de viscosidade.
A construção sólida desses medidores e excelente resposta dinâmica se adequam bem para a medição de diversos solventes, bem como outros fluidos lubrificantes não abrasivos.
Como não há necessidade de trecho reto de tubulação a montante ou a jusante do medidor de vazão, os medidores destas séries são simples de usar e instalar. O medidor tem boa resolução e alta exatidão em baixas vazões.
***
The FPD3100 Series positive
displacement flowmeters are
affordable and accurate. One
primary feature is the ability to
maintain consistent accuracy
despite changing viscosity
conditions. The meter’s solid
construction and excellent dynamic
response are well suited to the
measurement of many corrosives
as well as other non-abrasive fluids.
Since there is no need for straight
run piping upstream or downstream
of the flowmeter, the FPD3100
flowmeters are simple to use and
to install. The meter has good
resolution and high accuracy at
low flow rates.
Specifications Accuracy: ±0.5% of reading Repeatability: ±0.03% Fitting Type: NPT: Female BSP: “-BSP” option Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA) Reed Sensor Power: 30 Vdc (500 mA) Output Options: Pulse Output: Standard NPN 4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options Rate: User defined Total: Resettable Accumulated-Total: Non-resettable FPD3105 Minimum Viscosity: 1cPs Maximum Viscosity: 1000 cPs standard Maximum Pressure: See chart on next page Strainer Size: See ordering chart on next page Mounting: Shafts must be in a horizontal plane Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option Cable Length: 1 m (3') stripped ends, non-display models Mounting: Pipe Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included) Liquid Temperature: -40 to 80°C (-40 to 176°F), -20 to 60°C (-4 to 140°F) for display models Materials Body and Rotors: PPS Seals: FKM, FEP (FPD3105) Fasteners: Stainless steel Cable Insulation: PVC Shaft: Hastelloy C Enclosure: NEMA 6 (IP67)
We noticed you are from the US. Visit your local site for regional offers and live support.