All Wetted Parts Including Flowmeter Liner are TFE Recommended for Corrosive Service and Ultra Pure Water Flow Applications
Suitable for Clean Liquid Service
Supplied with 316 SS Flowmeter Housing and 150 ANSI Flanges
Compatible with Signal Conditioners
Descrição
The FTB-1200 Series has been discontinued. Please see the FDH-1 Series as a possible alternative or contact our Flow Engineering department.
All wetted parts of OMEGA’s FTB-1200 Series turbine meters are
TFE including liner in the flowmeter housing. Magnets are
embedded in the TFE blades of the rotor assembly.
Within the turbine flowmeter, the flowing medium engages a
vaned rotor causing it to rotate at an angular velocity proportional to
the flowrate. The pickup coil senses the spinning motion of the rotor
through the housing and converts it into a pulsing electrical signal.
Totalling the pulsing electrical signal directly yields to the total flow,
while the frequency is linearly related to the flowrate. Sleeve-type
bearing, rotor, cones and flow straightening sections are made of
machined TFE . 150# ANSI flange size available in sizes from
1 /4 to 3". The TFE series offers a linearity of ±1% of reading and
a repeatability of ±0.1% of reading.
Please download
PDF below for complete product specifications
We noticed you are from the US. Visit your local site for regional offers and live support.