| 

Transmissor de Nível de Ondas Radar Guiado

LVRD10

Transmissor de Nível de Ondas Radar Guiado | LVRD10
Novo

Transmissor de Nível de Ondas Radar Guiado

imagem meramente ilustrativa

1 ano de garantia CE
  • Diagnóstico de Falhas com Saída de Sinal Selecionável
  • Reconhecimento, Armazenamento e Rejeição de Sinais de Eco Falsos
  • Invólucro NEMA 4 (IP66) em alumínio
  • Antena e Conexões de Montagem em aço inox 316L
  • Configuração Simples Através de Software Gratuito
  • O Sinal de Radar de Onda Guiada não é Afetado por Vapor ou Condensação
  • A Banda Morta de Apenas 10 cm (4") Permite a Utilização no Tanque Todo
Medição de Nível - Ver Produtos Relacionados

Descrição

The LVRD10 Series of general purpose guided wave radar level transmitters provide continuous level measurement with a 4 to 20 mA signal output. Offered in three probe (rod, coaxial or cable) configurations up to 3 m (9.8'') for the rod and coaxial and 5.5 m (18.0'') for the cable design. The sensor is configured using the easy, yet powerful software (free download at OMEGA).

The contact liquid level sensor is intended for low corrosive chemical, waste, oil or water storage applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Select the sensor for easy application conditions with light agitation, condensation or vapor, and installation in a tank adapter or flange fitting.

Specifications
Housing
Range: Rod/coaxial; 3.0 m (9.8'')
Cable: 5.5 m (18.0'')
Dead Band: 10 cm (4")
Accuracy: ±3 mm (0.118")
Repeatability: < 2 mm (0.08")
Resolution: < 1 mm (0.04")
Dielectric Constant: > 2
Configuration: PC Windows® USB 2.0
Supply Voltage: 10 to 30 Vdc
Signal Output: 4 to 20 mA, 3-wire, 22 mA maximum
Consumption: < 50 mA at 24 Vdc
Signal Fail Safe: 4 to 20 mA, 21 mA or hold last value
Process Temperature: -40 to 150°C (-40 to 302°F)
Pressure: -1 to 17 bar (-14.5 to 250 psi)
Enclosure: Aluminum with single conduit
Enclosure Rating: NEMA 4 (IP66)
Conduit Entrance: ½ NPT
Antenna Material: 316L SS
Feed Through Material: 316L SS and peek
Process Mount: ¾ NPT or ¾ G
Classification: General purpose
Compliance: CE, RoHS
We noticed you are from the US. Visit your local site for regional offers and live support.