| 

Ceramic Insulated Finned Strip Heaters - Two Terminals One End - T4 Type

CSF4 Series

Ceramic Insulated Finned Strip Heaters | CSF4 Series

Ceramic Insulated Finned Strip Heaters

imagem meramente ilustrativa

  • Rugged, Durable Construction
  • Stainless Steel Sheath
  • Nickel-Plated Steel Fins (Stainless Steel Optional)
  • Various Terminations
  • Trouble-Free Installation
  • Various Sizes in Stock
Aquecedores tipo Barra - Ver Produtos Relacionados

Descrição

OMEGA™ finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil is mechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air. OMEGA finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.

Specification and Tolerances
If tighter tolerances are required consult Omega.
Performance Ratings
Maximum Sheath Temperature: 650°C (1200°F)
Electrical Specifications
Maximum Voltage: 480 Vac (when applicable)
Maximum Amperage: 25 A
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
Material Specifications and Physical Sizes
Sheath: 304 stainless steel
Fins: Nickel plated steel (stainless steel optional)
Screw Terminals: Stainless steel 10-32 UNF threads
Width Including Fins: 51 mm (2")
Height Including Fins: 35 mm (13/8")
Length Tolerance: Up to 0.61 m (24") ±1/16", over 0.61 m (24") ±1/8"
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Slot Size For Secondary Insulating Bushing: 13 x 16 mm (1/2 × 5/8") for 300V and above

Model No. Length Watts Watt Density
120V 240V mm inch Watt/cm2 Watt/in2
CSF00252 — 215.9 81⁄2 250 3 18
— CSF00039 266.7 101⁄2 350 3 17
CSF00129 CSF00130 266.7 101⁄2 500 4 24
CSF00042 — 266.7 101⁄2 600 4 29
CSF00044 CSF00045 266.7 101⁄2 725 5 35
CSF00209 — 266.7 101⁄2 850 6 40
CSF00047 — 304.8 12 500 3 19
CSF00053 CSF00054 304.8 12 900 5 34
CSF00056 CSF00057 355.6 14 750 3 23
CSF00060 CSF00061 355.6 14 1100 5 33
CSF00065 — 387.4 151⁄4 1000 4 27
CSF00143 CSF00067 387.4 151⁄4 1250 5 33
CSF00071 — 454.0 177⁄8 1000 3 21
CSF00073 — 454.0 177⁄8 1300 4 28
CSF00148 CSF00075 454.0 177⁄8 1550 5 33
— CSF00077 495.3 191⁄2 1250 4 24
— CSF00080 495.3 191⁄2 1700 5 32
CSF00158 CSF00085 533.4 21 1900 5 33
— CSF00088 603.3 233⁄4 1450 3 22
— CSF00090 603.3 233⁄4 2200 5 33
— CSF00100 679.5 263⁄4 2500 5 32
— CSF00102 774.7 301⁄2 1800 3 20
— CSF00104 774.7 301⁄2 2800 5 31
— CSF00180 850.9 331⁄2 3150 5 31
— CSF00350 911.2 357⁄8 2000 3 18
— CSF00110 911.2 357⁄8 3450 5 31
— CSF00117 1079.5 421⁄2 4150 5 31
Ordering Example: CSF00252, 250 watt, 120 Vac, finned strip heater.
We noticed you are from the US. Visit your local site for regional offers and live support.