3-1/2 Digit AC Power Line Monitor, 1/8 DIN

DP301AN-AC

imagem meramente ilustrativa

1,999 Count Display Span
50.0 to 199.9 Vac Range (100 mV Resolution)
50 to 650 Vac Range (1V Resolution)
Bright, 14 mm (0.56") LED Display
Automatic Zero
Display Hold and Test
Screw-Terminal Barrier Strip
Short 104 mm (4.1") DeeP 1/8 DIN Case

Options
Isolated 9 to 32 Vdc Power
Isolated 26 to 56 Vdc Power
NEMA 4 (IP65) Splash Proof Lens Cover
NEMA 4 (IP65) Splash Proof Lens Case

Intrumentos para Medição e Controle de Processos - Ver Produtos Relacionados

Descrição

The DP301AN-AC is a low-cost, compact 3-1/2 digit panel meter for AC power line monitoring. It uses a half-wave rectifier calibrated to read the RMS value of sinusoidal signals.

Two input ranges are jumper-selectable: 50.0 to 199.9 Vac with 100 mV resolution and accuracy optimized for 115 Vac, and 50 to 650V with 1V resolution and accuracy optimized for 230 Vac. The meter fits a standard ¹/8 DIN panel cutout 92 x 45 mm (3.62 x 1.77") and requires a depth of less than 104 mm (4.1") behind the panel. A screw-terminal barrier strip for signal and power is standard.

Mechanical options include a board-edge connector display TEST, display HOLD, +4.7V and -4.7V outputs splash-proof lens cover which meets NEMA 4 (IP65) requirement is available for industrial environments. Power options isolated 9 to 32 Vdc and 26 to 56 Vdc.

SPECIFICATIONS
Noise Rejection (AC GND to SIG GND)
CMR: 120 dB, DC to 60 Hz
CMV: 1500 Vp per HV test, 354 Vp per IEC spacing
Accuracy at 25°C (10 to 100% of Full-Scale Range)
Maximum Error (Reading–Actual):
50.0 to 199.9 V range: ±0.006 (R-115 V)
±0.1 V and 50 to 650 V range: ±0.006 (R-230 V) ±1 V
Span Tempco: ±0.01% of reading/°C
Step Response: 1 s
Warmup to Rated Accuracy: 10 min
Signal Input
Configuration: Half-wave average, RMS-calibrated
Zero: Automatic
Frequency: 49 to 440 Hz
Display
Type: 7-segment, red LED
Height: 14.2 mm (0.56")
Symbols: 1.8.8.8
Decimal Points: Three positions programmable internally or at connector, 10 mA average sink
Overrange Indication: Three least-significant digits blank
Power
AC Voltages: 115 or 230 Vac ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.4 W (nominal)
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%, 10 mA max
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: -40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Analog-to-Digital Conversion
Technique: Dual-slope, average-value
Read Rate: 2.5/s
Integration Period: 100 ms
Digital Controls
HOLD and TEST Inputs: TTL or 5 V CMOS compatible
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.09")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate