Economical Purge Variable Area Flow Meters -
Economical Purge Variable Area Flow Meters
imagem meramente ilustrativa
±10% Full Scale Accuracy
±1% Full Scale Repeatability
Low Pressure Drop
Direct Reading Scales for Air and Water
Fully Rotatable Line Connectors for Easy Hookup
Convenient Panel Mounting
Integral Flow Control Valve
The FL-1000 series has been discontinued.
Please consider the FL-2000
for possible alternatives.
Advanced concepts and design at a very low cost – that’s the OMEGA™ FL-1000 Series of flowmeters, made of high-impact polycarbonate. These units are designed to provide a practical approach to low flow rate indication of non-corrosive liquids and gases at the lowest possible cost. The FL-1000 Series flow meter is equipped with a standard flow control valve. The FL-1000 flowmeter features a single unit polycarbonate tube, bezel and integral float stops for high impact resistance, with easy-to-read design, and ribbed tube construction for increased performance. Ideal for low flow measurements.
SPECIFICATIONS Accuracy: ±10% full scale Repeatability: ±1% full scale Meter Body, Clean-Out Plug, Float Stop: FDA Approved Polycarbonate Floats: 316 Stainless Steel (spherical) O-Rings: Buna Line Connectors: Stainless Steel Valve: Stainless Steel
Scales Nominal Length: 37 mm (1.46") Display: Direct reading for air or water
Ratings Maximum Operating Pressure: 100 psig Operating Temperature: -29 to 54°C (-20 to 130°F). Fluid temperatures below 0°C (32°F) can cause frosting of plastic meter body Connections: 1/8 FNPT, horizontal (inlet and outlet); fully rotatable Flush Panel Mount Cutout: 94 x 24 mm (3.72 x .94") Max Panel Thickness: 4.76 mm (3/16") Pressure Drop: FL-1002: 96" water FL-1004: 136" water FL-1006: 191" water