Variable Area Flow Meters for Corrosive Applications - Discontinued

FL-1700

imagem meramente ilustrativa

±10% Full Scale Accuracy
±0.5% Full Scale Repeatability
Compact 65 mm (2.6") Scale
Direct Reading Scales for Air and Water
PVDF and Glass Wetted Parts
Machined End Fittings
Side Plate Construction
Non-Rotating Seal Spindle

Descrição

The FL-1700 Series has been discontinued. Please see the FL-3000 and 3100 Series as a possible alternative or contact our Flow Engineering department.

The OMEGA ® FL-1700 and FL-1800 glass tube variable area flow meters are similar in design to the FL-1300 and FL-1400 series units, except that these units are designed for use with corrosive fluids. Fluid contact is limited to the glass tube and float, PVDF end fittings, FKM O-Rings and tube packing and the PTFE float stops. No stainless steel wetted parts are employed.
These units are also available with an optional integral needle control valve (Note: the valve has 316 SS wetted parts).

SPECIFICATIONS
Scales: 65 mm (2.6"), direct reading for air and water
Accuracy: ±10% full scale
Repeatability: ±0.5% full scale
Connections: ¼ NPT, female horizontal
Metering Tubes: Borosilicate glass
Floats: Glass
End Fittings
    Seal Spindle: PVDF
    Side Plates: Aluminum
    Float Stops: PTFE
    Tube Packing: FKM
    O-Rings: FKM
Max Pressure: 10.34 bar (150 psig) at 38°C (100°F)