| 

PRODUCT DISCONTINUED

FPUGR100/200 Series Discontinued

Bronze Gear Pumps | FPUGR100/200 Series Discontinued

Bronze Gear Pumps

imagem meramente ilustrativa

1 ano de garantia
  • Suitable for Pumping Water, Oils and Select Solvents
  • Outputs a Relatively Constant Flowrate Regardless of Outlet Pressure
  • FPUGR100 Series Handles Fluids up to 500 SSU Viscosity and FPUGR200 Series up to 100,000 SSU (with Proper Motor)

Descrição

The FPUGR100 Series has been discontinued. Please contact our Flow and Environmental department for possible substitutes.

The FPUGR100 and FPUGR200 series positive displacement pumps output a relatively constant flow rate regardless of outlet pressure, providing an almost pulsation-free flow. Pumps are self-priming up to 20 feet dry with new gears; however, running the pump dry will substantially decrease gear life. The FPUGR100 and FPUGR200 series feature Buna (FKM optional) zero-leakage lip seals. To protect against excessive back pressure, order a model with a built-in relief valve (models with “-R”; suffix); otherwise, a blocked discharge line can raise back pressure and damage in-line components or the pump.

The FPUGR100 series feature self-lubricating bronze gears and carbon-graphite bearings, making the FPUGR100 pumps ideal for non-lubricating liquids such as water and certain solvents.

All FPUGR100 motors are continuous duty for 60 Hz Vac, feature open drip-proof enclosures, operate at 1725 rpm. For 115/230 Vac units, the customer must rewire the power cord and a suitable plug for 230 Vac. The 230/460 Vac units must be hard- wired by the customer.

The FPUGR100 Series are limited to operating with fluids having 500 SSU (100 SSU for the FPGR109 series) maximum viscosity.

FPUGR200 Series pedestal pumps require user-supplied motors (up to 1725 rpm max.) and can be used with fluids having up to 100,000 SSU viscosity with the proper motor. Gear pump motor rpm must be reduced when pumping viscous liquids (refer to Speed Reduction Table on page L-5), and horsepower must be increased over that which would be required for pumping water (33 SSU). Use the Multipliers for HP Table and multiply by the water horsepower (from the Performance Table on page L-5) to arrive at the viscous horsepower (see “determining required horse power for viscous liquid” example following the Tables on page L-5). The FPUGR200 is used for non-lubricating liquids such as water or solvents; carbon-graphite bearings (models with suffix “-CB”) are standard.

CAUTION: LIQUIDS CONTAINING SOLIDS ARE NOT RECOMMENDED FOR USE WITH GEAR PUMPS.

FPUGR100 Close-Coupled Gear Pumps (Supplied with Motors)
Model No. Flowrate
(GPM Water)
Relief
Valve
Motor
HP
Volts Phase Port
Size
NPT(F)
Shp.
Wt.
kg (lb)
Overall
Dim.
HxWxL (in)
0 psi 100 psi
FPUGR1010.90.61No1/4115/23011/47.7 (17)6 x 6 x 14
FPUGR101-R0.90.61Yes1/4115/23011/47.7 (17)6 x 6 x 14
FPUGR1022.11.5No1/311511/47.7 (17)6 x 6 x 14
FPUGR102-R2.11.5Yes1/311511/48.2 (18)6 x 6 x 14
FPUGR1032.11.5No1/2115/23011/47.7 (17)6 x 6 x 14
FPUGR103-R2.11.5Yes1/2115/23011/48.2 (18)6 x 6 x 14
FPUGR1042.11.5No1/3230/46031/47.7 (17)6 x 6 x 14
FPUGR104-R2.11.5Yes1/3230/46031/48.2 (18)6 x 6 x 14
FPUGR10543No1/311513/88.6 (19)6 x 6 x 14
FPUGR105-R43Yes1/311513/88.7 (19.5)6 x 6 x 14
FPUGR10643No1/3230/46033/810 (22)6 x 6 x 14
FPUGR106-R43Yes1/3230/46033/810.2 (22.5)6 x 6 x 14
FPUGR10743No1/2115/23013/810.5 (23)6 x 6 x 14
FPUGR107-R43Yes1/2115/23013/810.7 (23.5)6 x 6 x 14
FPUGR10810.59.4No2230/46031/224.5 (54)7 x 9 x 18
FPUGR108-R10.59.4Yes2230/46031/225 (55)7 x 9 x 20
FPUGR10923No3230/4603128.6 (63)9 x 10 x 22
FPUGR109-R23Yes3230/4603129 (64)9 x 10 x 24
Comes with gear pump head, motor, and complete operator's manual.

FPUGR200 Pedestal Pump Heads (Require User-Supplied Motors to 1725 rpm Max.)**
Model No. Relief
Valve
Port
Size
NPT(F)
Shp.
Wt.
kg (lb)
Overall
Dim.
HxWxL (in)
Shaft
Dia x
Center Line
FPUGR201-CBNo1/8(3) 1.43 x 3 x 81/2 x 1.88
FPUGR201-RCBYes1/8(3) 1.43 x 3 x 71/2 x 1.88
FPUGR202-CBNo1/4(4) 1.84 x 3 x 61/2 x 2.36
FPUGR202-RCBYes1/4(5) 2.34 x 3 x 71/2 x 2.36
FPUGR203-CBNo3/8(6) 2.74 x 4 x 75/8 x 2.63
FPUGR203-RCBYes3/8(7) 3.24 x 4 x 85/8 x 2.63
FPUGR204-CBNo1/2(7) 3.24 x 4 x 75/8 x 2.63
FPUGR204-RCBYes1/2(8) 3.64 x 4 x 95/8 x 2.63
FPUGR205-CBNo3/4(10) 4.55 x 4 x 75/8 x 3.56
FPUGR205-RCBYes3/4(11) 55 x 4 x 95/8 x 3.56
FPUGR206-CBNo1(11) 55 x 4 x 75/8 x 3.56
FPUGR206-RCBYes1(12) 5.55 x 4 x 95/8 x 3.56
Comes with complete operator's manual.
**Refer to Performance Table above for recommended horsepower (HP) and flowrate (GPM) information. Standard units come with carbon bearings which require no lubrication.
We noticed you are from the US. Visit your local site for regional offers and live support.