3-A Certified Sanitary Clamp High Temperature Turbine Meters

G-Series 3-A

imagem meramente ilustrativa

Meets 3-A Sanitary Standards
Meets CIP, SIP, COP requirements
Meter includes a traditional design
Available in a variety of sizes
Low Profile option available
ORDERING INSTRUCTIONS: Step 1, Select Flow Meter. Step 2, Select A Magnetic Pick-up from Accessories. Step 3,Select Cable if Required from Accessories.

Medidores de Vazão tipo Turbina e tipo Rotor - Ver Produtos Relacionados

Descrição

The G-Series High Temperature Sanitary Turbine Flowmeters are volumetric flow measurement devices. The moving fluid is used to turn a rotor, which is suspended in the flow stream. The rotating speed of the rotor is proportional to the fluid velocity or flowrate. As the blades from a spinning rotor pass by a magnetic sensor, an AC voltage pulse is generated and transmitted to the readout instrument. Each pulse is equal to a given volume of liquid therefore “x” number of pulses are equal to a gallon, litre, pound, barrel, etc.

Select a Magnetic Pick-up from The Table

Selection Guide for 1 in. 1-1/2., 2 in. Turbine Meters
Magnetic Pickup type	Part No.	Application	Cable Type
Wire Lead Standard	81003000	Meter mount electronics. Temperature range: -100°F to +250°F. Sine wave output.	None

Herm/High Temp.	81002000	Remote mount electronics. Temperature range: -450°F to +258°F. Sine wave output.	T
High Temp. Standard	81007000	Remote mount electronics. Temperature range: -450°F to +800°F. Sine wave output.	T
Active Digital	81004000	Remote mount electronics. Temperature range: -40°F to +248°F. Square wave, open collector output, 5-32 VDC required. Signal output: 0-10V, NPN	D