Big Display Meters and Signal Conditioners - Discontinued

Descrição

Starting from Feb 1st 2018, ILD-FP & AC Series have been discontinued. As a possible substitute, please check out the ILD-UTP & SP Series or the LDB Series for details.

The "AC BIG Displays" (iLD-ACC and iLD-ACV) provide accurate isolated measurement of AC Voltage and Current signals. The AC Voltage model can be scaled for ranges from 0 to 400 mVac through 0 to 400 Vac. The AC Current model covers ranges from 0 to 10 mA through 0 to 5 Amps AC. The "Frequency Pulse BIG Display" (iLD-FP) provides accurate isolated measurement of frequency (from 200 Hz to 50 KHz) and pulse signals (up to 200 M pulses full scale) that can be scaled to any engineering units.

Programmable Color Display The iLD-ACC, iLD-ACV, and iLD-FP feature BIG bright 7-segment LED's that can be programmed to change colors between RED , AMBER, and GREEN to indicate visual alarms. The BIG Display can be mounted flush in a panel or surface mounted with the included brackets. The entire BIG Display enclosure provides NEMA 4/IP65 protection. Whether panel-mounted or surface-mounted, the BIG Display does not need to go inside a bulky and expensive NEMA enclosure.

Configuration of the iLD-ACC, -ACV, or -FP will be performed using RS-485 communication standard at half duplex and the configuration software that is available on our website. With the Ethernet (-EI) option you can "see" your meter and control your process through a web browser over the Internet from halfway around the world. With the Isolated Analog Output (-C2A) option, user can select output range for 0 to 10V, 4 to 20 mA, or 0 to 20 mA using serial RS-232 and the configuration software (this eliminates the RS-485 communication available on the standard model). Factory Scaling (-FS) is available if you prefer the unit to be fully configured before shipment. Please provide your selections for Factory Scaling settings:

iLD-ACC-FS iLD-ACV-FS Input Range: 10 mA, 100 mA, 1 A, 5 A Input Range: 400 mVac, 40 Vac, 400 Vac Select your Input Range and Display Range Factory Scaling Example: 0 to 5 A = 0 to 50.00 Select your Input Range and Display Range Factory Scaling Example: 0 to 400 Vac = 0 to 6000

iLD-FP-FS Pick from each selection Mode: Frequency, A-B, Totalize Excitation: 12.5 V, 5 V, 8 V Pull up/down: None, 3 K pull-up, 1 K pull-down Gate Time: in milliseconds Debounce Time: in milliseconds Debounce Contact: Yes/No? Low Level Input: Yes/No? Frequency Range: 0.2 Hz to 50 KHz For Frequency Mode select your Input Range and Display Range Factory Scaling Example for Frequency Mode: 0 to 1 KHz = 0 to 5000 For Totalize and A-B Mode select your Input Range and Display Range Factory Scaling Example for Total / A-B Mode: 0 to 100 pulses = 0 to 2000 display counts

Manuais:

Produtos Relacionados: