| 

Big Display, Remote Display - Discontinued

iLD-C2, iLD-EI

Big Remote Display | iLD-C2, iLD-EI

Big Remote Display

imagem meramente ilustrativa

  • BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LEDs
  • BIG 7-segment LEDs, 4 or 6-Digits
  • Program to Change Colors: RED, AMBER, GREEN
  • RS-232/RS-485 Input
  • Ethernet Input

Descrição

Starting from Feb 1st 2018, ILD-EI & C2 Series have been discontinued. As a possible substitute, please check out the ILD-UTP & SP Series or the LDB Series for details.

The "Serial RS-232 BIG Remote Display" (iLD-C2) are 4 or 6 digit slave displays providing remote readout from instruments such as programmable controllers, digital panel meters and other instruments with serial output. Two communication interfaces are supported in Remote Display: RS-232 and RS-485 and can be programmed through front panel buttons.

The iLD-C2 can display data transmitted via serial communications from a computer, or from other devices which transmit ASCII data via RS-232 and RS-485. These BIG Displays are compatible with virtually all OMEGA™ devices that feature serial communications including: iSeries meters and controllers, DP41 digital panel meters, MICROMEGA™ controllers, iDRX DIN-RAIL mounted signal conditioners, and many more.

The "Ethernet BIG Remote Display" (iLD-EI) are 4 or 6-digit slave displays providing remote readout from instruments with an Ethernet output or display data from a computer.

The iLD-EI can display data transmitted via Ethernet from Omega instruments that have an Ethernet output option, (iSeries with -EI). You can tunnel or display the same data from a computer using telnet. Any two units with Ethernet option (iSeries with -EI or iServer) can talk to each other over the Ethernet LAN, WAN, and Internet using TCP/IP protocol. This allows the connected serial devices to an iServer to communicate with each other back and forth over TCP/IP networks.
Programmable Color Display
The iLD-C2 and iLD-EI feature BIG bright 7-segment LED's that can be programmed to change colors between RED, AMBER, and GREEN to indicate visual alarms.
In the "slave" mode, the BIG remote displays can be used for displaying alphanumerical characters from a computer using serial connection (iLD-C2) or Telnet (iLD-EI). Compatible Host device must feature serial RS-232 or RS-485 output.

The BIG Display can be mounted flush in a panel or surface mounted with the included brackets. The entire BIG Display enclosure provides NEMA 4 (IP65) protection. Whether panel-mounted or surface-mounted, the BIG Display does not need to go inside a bulky and expensive NEMA enclosure.
Programmable Color Display

Manuais:

Baixar iLD26-EI - Big Display with Embedded Ethernet
Baixar iLD24-EI - Big Display with Embedded Ethernet
Baixar iLD46-EI Series - Big Display with Embedded Ethernet
Baixar iLD44-EI Series - Big Display with Embedded Ethernet
Baixar iLD46-C2 - Big Remote Display with RS-232 Input
Baixar ilD44-C2 - Big Remote Display with RS-232 Input
Baixar iLD26-C2 - Big Remote Display with RS-232 Input
Baixar iLD24-C2 - Big Remote Display with RS-232 Input
We noticed you are from the US. Visit your local site for regional offers and live support.