Multiconductor Feedthroughs For High Temperature Sealing

MFT Series

imagem meramente ilustrativa

Pressure or Vacuum Applications
Seals Multiple Thermocouples
Seals Multiple Protection Tubes
NPT Mounting Thread
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included at No Extra Charge
3 to 16 Probes
416SS Body and Cap
316SS Ferrules Standard
PTFE Ferrules Available
Uses Standard OMEGALOK ® Ferrules
.040 Through 1 /4 " Diameter Probes
Blank Sealing Plugs Included at No Extra Charge

Conectores e sistemas de painéis - Ver Produtos Relacionados

Descrição

These all new multiconductor feedthroughs are designed for use in applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy duty 416 stainless steel construction allows this fitting to be used in high pressure or vacuum applications. Probes between 0.040" and 0.250" can be used with these feedthoughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 or 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter and 16 or 0.040" diameter.

All multiconductor feedthroughs are supplied in standard form with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If it is required that the probes be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, allowing the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK™ compression fittings.

Produtos Relacionados:

MFT Series

VER MODELOS E PREÇOS →

Metric Multiconductor Feedthroughs