LIGHTWEIGHT OIL IMMERSION HEATER With 2 Element Design With 2 Inch NPT Steel Screw Plug

MTO-2 Series

LIGHTWEIGHT OIL IMMERSION HEATER

imagem meramente ilustrativa

Rugged Steel Sheath for Use with Lightweight Oils
1.5 to 6 kW
120 280, 240 or 480V. 1 Phase
General Purpose1 NEMA-1 Rated and UL Listed Enclosure or Moisture Resistant/ Explosion Enclosure2

Aquecedores de Imersão - Ver Produtos Relacionados

Descrição

Please Note: The immersion heater should be used with an approved temperature control device to assure safe operation. See Temperature Section for our selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	E1 General Purpose Enclosure¹		E2 Explos. /Moist Res. Encl.²
kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	Model No.	Wt. Ib (kg)	Model No.	Wt. Ib (kg)
1.5	24	2	11 3/4(30)	MTO-215A/*	3 (1)	MTO-215E2/*	6 (3)
2	24	2	17 3/4 (45)	MTO-220A/*	4 (2)	MTO-220E2/*	7 (3)
2.5	26	2	19 5/8 (9)	MTO-225A/*	4 (2)	MTO-225E2/*	7 (3)
3	23	2	24 7/8 (63)	MTO-230A/*	4 (2)	MTO-230E2/*	7 (3)
4	23	2	32 3/4 (83)	MTO-240A/*	6 (3)	MTO-240E2/*	8 (4)
5	23	2	40 1/4 (102)	MTO-250A/*	7 (3)	MTO-250E2/*	8 (4)
6	23	2	47 3/4 (121)	MTO-260A/**	7 (3)	MTO-260E2/**	9 (4)

/*Designate voltage, i.e., insert 120 for 120 Vac, 208 for 208 VAC, 240 for 240 Vac, or 480 for 480 Vac.
//* Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
1 Heaters with General Purpose Enclosures are UL recognized and CSA Certified.
2 Heaters with Moisture Resistant/Explosion Resistant Enclosures are CSA NRTL/C Certified.