Carrinho  |  Contato  |  Suporte  | 
Atendimento e Vendas 0800-773-2874
e-mail:vendas@br.omega.com

High Temperature Cements, Models, OB-300, OB-400, OB-500, - Descontinuado

OMEGABOND™ Air Set Cement Series

 | OMEGABOND™ Air Set Cement Series

imagem meramente ilustrativa

Veja lista de preços e produtos abaixo

  • Thermally Conductive
  • Thermal Shock Resistant
  • Electrically Insulating
  • Resists Oils, Solvents, Most Acids
  • Adheres to Practically All Clean Non-Porous Surfaces
  • Porous Surfaces May Require Dampening**
  • OMEGABOND™ 300 for Assembling, Sealing, Insulating
  • OMEGABOND™ 400 for Coating, Embedding, Insulating
  • OMEGABOND™ 500 for Coating, Dipping, Casting

Descrição

Air Set Cements set or cure through loss of moisture by evaporation. Atmospheric conditions therefore affect the drying rate. Air Set Cements are used mainly in thin film applications (applied in thicknesses less than 1/4")*.

SELECTION CRITERIA FOR CEMENTS
1. Type of Application – Potting, sealing, encapsulating, assembling, bonding. Is a thick or thin film of cement required? This dictates whether or not an air set or a chemical set cement should be used.
2. Thermal Considerations – What is the maximum temperature that the cement must withstand? What degree of thermal conductivity is needed? What degree of thermal expansion is allowed? These parameters are then matched to the appropriate cement.
3. Substrate – What materials will the cement be in contact with?
4. Application Considerations – Pot life, set time, method of dispensing, batch size, cure procedure.
5. Miscellaneous Considerations – Porosity, moisture absorption, electrical resistance, volume stability, clearances/tolerances.

For complete product specifications see the Related Links section at the bottom of this page.
Preços indicados em Reais e já incluem todos os impostos e taxas de acordo com a legislação vigente. Nota: Não pode ser vendido fora dos Estados Unidos.