| 

Low Differential Pressure Switches, SPDT Relay Output  - Discontinued

PSW-141

Low Differential Pressure Switches, SPDT Relay Output | PSW-141

Low Differential Pressure Switches, SPDT Relay Output

imagem meramente ilustrativa

1 ano de garantia
  • Virtually Impervious to changes in Position
  • Fast Response Time Due to Low Internal Volume
  • No Moving Parts - Solid State Circuity for Long Life
  • Compact Size
  • Low Power Consumption

Descrição

LIMITED STOCK AVAILABLE. This item is being discontinued.
Please see the PSW-150 Series as a possible substitute.


PSW141 Series low differential pressure switches operate on the capacitive principle and are capable of sensing very low positive or negative pressures. In a capacitive cell, a very lightweight, responsive diaphragm deflects slightly when pressure is applied. This deflection results in a change in capacitance which is then detected and processed by solid state circuitry. Reliability and long life are inherent advantages of this design.

SPECIFICATIONS
Set point is adjusted by a 20-turn potentiometer for fine resolution
Repeatability: ±1% of set point
Deadband: Factory set to 7% of range to prevent relay chatter
Media Compatibility: Suitable for air or inert gases
Overpressure: 8 times range maximum
Port Connections: 4.8 mm ( 3 /16 ) dia. tube; suitable for 3.2 mm ( 1 /8 ") I.D. Tygon tubing
or 6.3 mm ( 1 /4 " O.D.) polyethylene tubing
Power Requirements:
12 Vdc models* = 9.5 to 16 Vdc @ 0.25 W
24 Vdc models* = 19 to 32 Vdc @ 0.25 W
24 Vac models = 19 to 32 Vac @ 1.50 W
120 Vac models = 100 to 140 Vac @ 1.70 W
* Reverse polarity protected
Electrical Connections: 3 /8 " terminal strip with #6 screw
Output: SPDT (form C) relay 1 A, 24 Vdc or 0.5 A, 120 Vac resistive
0.3 A, 24 Vdc or 0.2 A, 120 Vac inductive 300,000 cycles minimum
Isolation: Input to output 500 Vrms min.
Dimensions: 76 W x 131 L x 36 H mm (3.0 x 5.15 x 1.4")
Weight: 230 g (0.5 lb)
Case Material: Flame retardant, glass-reinforced Noryl
Operating Temperature: 0 to 45°C (32 to 113°F)
Temperature Effect on Set Point: ±0.05%/°C
Humidity Range: 20 to 90% RH non-condensing
Shock: 10 g’s (11 ms)
Vibration: 5 g’s to 50 Hz

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
We noticed you are from the US. Visit your local site for regional offers and live support.