Shear Gages - Full Bridge Shear

SGT-2DD and SGT-3 series

imagem meramente ilustrativa

Precision Transducer Quality Gages
350 or 700 ohm Bridges
compensated for Steel or Aluminum
2 Half Bridge Pattern can be used a 1 Full Wheatstone Bridge

Medidores de Deformação Mecânica - Ver Produtos Relacionados

Descrição

OMEGADYNE® offers full bridge transducer quality strain gages for shear and torsional strain applications. These strain gages can be used in transducer design for shear beam load cells, or they can also be used for reaction torque on a shaft.

SGT-2DD/350-SY** has 2 half bridges on one carrier piece. Each half bridge has a dual shear pattern, with opposite grids and a common lead/solder pad. SGT-3/700-FB** has 4 independent shear strain gages, with opposite grid angles, on one carrier, with separate leads/pads (electrically independent). Below we show one wiring example; SGT-2DD/350-SY** used to measure a reaction torque on a shaft. The strain gages have been numbered, and the leads/solder pads labeled.

Produtos Relacionados:

TT300, SG496, SG401

VER MODELOS E PREÇOS →

Strain Gage Adhesives