Fale
conosco
  | 

Slip-Ring Assembly for Rotating Shaft Measurements of Temperature, Strain, Force or Pressure
DISCONTINUED - Products containing MERCURY are NO LONGER AVAILABLE

SR-2

Thermocouple Slip-Ring Assembly | SR-2

Thermocouple Slip-Ring Assembly

imagem meramente ilustrativa

  • Low Noise
  • Low Resistance
  • Mercury-Wetted Contacts

Descrição

This low noise slip-ring assembly is ideal for transmission of low level emf’s such as thermocouples, strain or mV signals from pressure or load transducers where it is necessary to attach sensors to rotating parts. Its low noise design introduces a total signal error of less than five microvolts at rotational speeds up to 2000 rpm.

The output leads consist of plain copper wires. Therefore for thermocouple use the SR-2 should be in an isothermal environment with the proper thermocouple leads attached to both ends. The slip-ring assembly will transfer the true microvolt signal coming from a rotating assembly to your instrumentation.

For complete product specifications see the Related Links section at the bottom of this page.

Products containing MERCURY are NO LONGER AVAILABLE.
Please consult Temperature Engineering for possible substitues for your application.
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >