Clean Water Immersion Heater with Integral Thermostat, 1" NPT Fitting

ARTM Series

Tank Heater

imagem meramente ilustrativa

1" Brass Screw Plug
Copper Sheath for Clean Water Applications
Integral Bulb and Capillary Thermostat— 3 Temperature Ranges Available
U.L. Listed with General Purpose NEMA-1 Rated Enclosure

Aquecedores de Imersão - Ver Produtos Relacionados

Descrição

ARTM Series screw plug immersion heaters are designed for direct contact heating in clean water applications. Please Note: The integral thermostat functions as a temperature control only. this not a fail safe device. An approved pressure or temperature control should be used with these heaters to assure safe operation. See section P for our full selection of control devices.

SPECIFICATIONS
Wattage: .75 to 3 kW Power: 120 or 240 VAC, 1 phase Sheath: 0.315" (.800 cm) diameter copper Screw Plug: 1" NPT brass Thermostat: bulb and capillary type, 3 temperature ranges available; 60-187°F, 60-240°F, or 0-127°F Watt Density: 64-68 W/in2 Enclosure: General Purpose NEMA-1; optional moisture tight/explosion resistant