Thermocouple Calibrator - Discontinued

CL130

imagem meramente ilustrativa

Measure and Source Thermocouples
Large, Easy-to-Read Display with Backlight
Thermocouple Simulation (Manual or Auto)
3 Programmable Step and Ramp Routines
Auto Step Simulation (0 to 100% or 25% Increments) with Definable LRV & URV

Equipamentos de Precisão para Calibração e Referências de Ponto de Gelo - Ver Produtos Relacionados

Descrição

The CL-130 model has been discontinued. Please see the CL541-Plus as a possible alternative or contact our Temperature Engineering department.

The CL130 thermocouple calibrator has been designed using the latest technology to provide reliable accuracy throughout its entire operating temperature range. The compact design makes the unit easy to carry and the intuitive user interface makes it easy to use. Temperature measurements/simulations are displayed on a large, easyto- read liquid crystal display (LCD). This unit has two backlights: a green backlight which is user activated to improve readability in low light conditions, and an automatic red backlight which indicates an over-range condition. Twelve keys provide access to the functional modes and menus, including measure, simulate, setup, run, record, edit, and backlight activation.

SPECIFICATIONS
mV Range, Accuracy: -15 to 80 mV, 0.005% Rdg ±6 mV
mV Temp. Effect: ±2 µV/°C (Ref. Temp = 23°C)
Cold Junction Effect: ±0.05°C/°C
Cold Junction Accuracy: ±0.1°C at 25°C
Resolution:
    Thermocouple Types E, J, K, N, T: 0.1°C
    Thermocouple Types B, R, S: 1°C
    mV: 0.001 mV (1 µV)
Environmental:
    Storage: -40 to 85°C (-40 to 185°F)
    Operating: -10 to 50°C (14 to 122°F)
    Humidity: 10 to 90% RH
    Maximum Input Voltage: 30 Vdc
Power Requirement
    Batteries: 3 “AA” batteries (included), field replaceable
Dimensions:
    Enclosure: 165 H x 81 W x 28 mm D (6.5 x 3.2 x 1.1")
Polycarbonate, Permanently Static Dissipative, ESD Protection Enclosure with Boot: 173 H x 89 W x 33 mm D (6.8 x 3.5 x 1.3")