Termômetro Pt-100 Digital com Invólucro em Aço Inoxidável

DTG-RTD100 Series

Termômetro Pt-100 Digital com Invólucro em Aço Inoxidável | DTG-RTD100 Series

Termômetro Pt-100 Digital com Invólucro em Aço Inoxidável

imagem meramente ilustrativa

2 anos de garantia CE
  • Large Backlit Display with 25 mm (1 in) Digits Readable From Over 10.7 m (35 ft)
  • NEMA 4X Rated 316 SS Enclosure
  • Up to ±0.2°C (0.3°F) or ±0.1% Rdg Accuracy
  • Connects Directly to 3-Wire Pt100 RTD Sensors
  • User Scaleable 4 to 20 mA, 0 to 5 or 0 to 10 Vdc Analog Output Standard
  • Powered by Internal Battery or External DC Power Supply
  • Included Setup and Service Software Allows for Fast Maintenance and Calibration via USB Connection
  • Wireless Transmitter Option Sends Readings to Remote Locations and Allows for PC-Based Chart Recording and Data Logging
  • Low Power Operation and Sleep Mode for Long Battery Life
  • Display Backlight Changes from Green to Blue for Low Alarm and from Green to Red for High Alarm
Aplicações Sanitárias - Ver Produtos Relacionados


OMEGA’s new DTG-RTD100 Thermometer Series features a rugged 316 SS enclosure that is designed specifically for washdown, sanitary and marine applications. The large backlit LCD display incorporates both large 25 mm (1in) digits and a 25 segment bar graph that make reading at distances up to 10.7 m (35ft) easy. Models are available with or without integral standard or sanitary sensors. Standard features include: internal battery external DC power supply operation, analog output and user programmable alarms. The wireless transmitter option allows for remote monitoring, chart recording and data logging. A variety of user configurable options and settings include: sample interval, units, alarm setpoints, backlight brightness and duration.

Range: -51 to 538°C (-60 to 1000°F)
Accuracy: ±0.2°C (±0.3°F) or ±0.1% of reading
Resolution: 0.1°C (0.1°F)
Operating Environment: -40 to 70°C (-40 to 158°F); 5 to 100% RH non-condensing
RTD Probe/Sensor Input: Pt100, 3-wire
Display Type: LCD with selectable backlight
Display Digits: 4 digits, 9999 counts
Character Height: 25.4 mm (1.0 in)
Computer Interface: USB (one programming cable included)
Sample/Display Interval: User adjustable from 0.375 to 30 sec, preset to 1/sec
Power: One 3.6V lithium, 8.4 Ah capacity (C cell) included; 12 to 24 Vdc
Battery Life (Typical): 1.5 years(without wireless option)
Analog Output: User selectable 0 to 5 Vdc, 0 to 10 Vdc, or 4 to 20 mA; Requires external 12 to 24 Vdc power supply for operation
Enclosure: 316 Stainless Steel housing, ABS center gasket
Enclosure Rating: Weatherproof, NEMA 4X (IP65) Settings (USB/Software)
Units: °F, °C, °K, °R
Keypad Lock: Allows for front button lock-out
Alarms: User selectable high and low alarm limits
Analog Output: User selectable scaling
Backlight: On/off, or 10 sec, 30 sec, 1 min, 5 min
Wireless Transmitter (Optional): Channel number, transmission rate, alarms, sensor offset, chart recording, data logging
Calibrate: Single or two point

Transmit Sample Rate: User programmable from 1 sample/2 min to 1 sample/every 2 sec
Radio Frequency (RF) Transceiver Carrier: ISM 2.4 GHz
RF Output Power: 10 dBm (10 mW)
Range of RF Link:
    Outdoor Line of Sight: Up to 120 m (400 ft)
    Indoor/Urban: Up to 40 m (130 ft)
Software (Included Free): Requires Windows XP/Vista/7 (32 or 64 bit)
Internal Battery: Two 3.6V lithium, 8.4 Ah capacity (C cell) included
Data Transmitted to Host: Temperature reading, ambient temperature reading, RF transmit strength and battery level


Baixar Digital Temperature Gauge
Baixar DTG-RTD100 - Digital Temperature Gauge (Newer Version)
Baixar Digital Temperature Gauge
We noticed you are from the US. Visit your local site for regional offers and live support.