| 

Through-Hole Bolt Load Cells
1.00" or 1.25" OD

LC8100/LC8125 Series

Miniature Low Profile Through-Hole Load Cells, 1.00

imagem meramente ilustrativa

  • 5 Point NIST Traceable Calibration with
    59 kOhm Shunt Cal Data
  • Miniature Low Profile Models
  • All Stainless Steel Construction
  • Rugged Industrial Design
  • 1.0 or 1.25 Inch Outside Diameter Available
Células de Carga - Ver Produtos Relacionados

Descrição

The LC8100 and LC8125 Series Donut Load Cell is an economical solution to applications requiring a through-hole design. With its extremely low profile and compact design, this load cell is ideal for applications such as clamping forces, bolt loading forces and other compressive loads. This series, with its all stainless steel construction have demonstrated proven reliability in tough industrial applications.

SPECIFICATIONS
Output: 2 mV/V nominal
Input: 10 Vdc (15V max)
Accuracy: ±1.0% linearity, hysteresis and repeatability combined
Zero Balance: ±2.0% FSO
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
   Zero: ±0.009% FSO/°C
   Span: ±0.018% rdg/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Deflection: 0.075 mm (0.003") nominal
Input Resistance: 360 Ω minimum
Output Resistance: 350 ±5 Ω
Construction: 17-4 PH stainless steel
Electrical: 1.5 m (5') 4-conductor shielded cable
We noticed you are from the US. Visit your local site for regional offers and live support.