8 Channel State Recorder and Data Logger - Discontinued



imagem meramente ilustrativa

  • Interfaces to Contact Closures or
    TTL Signals up to 30 V
  • Real Time Operation
  • Programmable Start Time
  • Programmable Engineering Units
  • Memory Wrap Around
  • Miniature Size


The OM-CP-OCTSTATE series has been discontinued. Please see the OM-CP-STATE101A as a possible alternative or contact our Data Acquisition Engineering department.

The OM-CP-OCTSTATE is a eight channel, battery powered, stand alone state recorder. This is an all-in-one compact, portable, easy to use device that will measure and record up to 52,484 state changes. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The OM-CP-OCTSTATE makes data retrieval quick and easy. Simply plug it into an available COM port and our user- friendly software does the rest.

The software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can be exported to a text or Microsoft Excel file.

Input Connection:
8 removable screw terminals
Input Low: <0.4 V
Input High: >2.7 V
Input Range: 0 to 30 V
Duty Cycle Limitation: 24 V:10%
(<6 seconds per minute) 18 V:25%
(<15 seconds per minute) 12 V:50%
(<30 seconds per minute)
Input Impedance: >1 KOhm
Time Resolution: 1 second (reading rate dependent)
Engineering Units: User may define units up to 10
characters in length. This value is stored within the device.
Scale Factor: User may program any desired scaling factor from
±1.000E-31 to ±9.999E+31. The scaling factor is stored within the device.
Start Time: Software programmable
start time and date, up to six months in advance
Reading Interval: 1 reading every
second to 1 every 12 hours
Memory: 52,484 state changes
Real Time Recording: May be used
with PC to monitor and record data in real time
Calibration Date: Automatically recorded within device
Power: 9 V lithium or alkaline battery (included); 120 Vac power optional
Battery: 1 year typical
Data Format: Date and time stamped state changes
(on/off) engineering units specified through software
Time Accuracy: ±1 minute/month
(at 20 °C,RS-232 cable not in use)
Computer Interface: PC serial, RS-232C COM or USB
(interface cable required); 2400 baud
Software:XP SP3/Vista/7 and 8 (32 and 64-bit)
Operating Environment:
-40 to 60 °C (-40 to 140 °F)
0 to 95%RH non-condensing
Dimensions: 89 H x 112 W x 39 mm D
(3.5 x 4.4 x 1.5")
Weight: 480 g (17 oz)
We noticed you are from the US. Visit your local site for regional offers and live support.