PCI Bus 144-Bit DIO Board

OME-PIO-D144

imagem meramente ilustrativa

144 Digital I/O Lines Buffered on the Board
Connect Directly to OME-DB-24 Series Compatible Daughter Boards
Emulates Industrial Standard
8255 Mode 0
Programmable Interrupt Handling
Five 50-Pin Flat Cable Connectors & One 37-Pin D-Sub Connector
Output Status Readback
High Output Driving Capability
No Base Address or IRQ Switches to Set
4 interrupt Sources: PCO, PCI, PC2, PC3

Cartões de Fácil Conexão - Ver Produtos Relacionados

Descrição

The OME-PIO-D144 provides 144 TTL digital I/O lines. The OME-PIO-D144 consists of eighteen
8-bit bi-directional ports (3 ports on each connector). The 8-bit ports on each connector are port A (PA), port B (PB), and port (PC). Each 8-bit port can be independently set as input or output. All ports are configured as inputs upon power-up or reset. The OME-PIO-D144 has one D-Sub connector and five 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable. The flat cable can be connected to OME-ADP-37/PCI or OME-ADP- 50/PCI adapter which can be fixed on the computer chassis. It can be installed in a 5 V PCI bus and supports true "Plug & Play".

Software Development Kit
All boards are supplied with a standard software development kit for Windows XP/Vista/7. The software development kit includes dll files for programming in C,C++ or other high level languages and OCX files for Visual Basic or Active X programming.LabView drivers are also included.

Specifications
ALL INPUTS AND OUTPUTS ARE TTL-COMPATIBLE
Logic High Voltage: 2.4 V (min)
Logic Low Voltage: 0.8 V (max)
Sink Current: 64 mA (max)
Source Current: 32 mA (max)
4 Interrupt Sources:
CON1, PC0, PC1, PC2, PC3
Operating Temperature:
0 to 60°C (32 to 140°F)
Storage Temperature:
-20 to 80°C (-4 to 176°F)
Humidity: 0 to 90% RH non-condensing
Dimensions:
105 H x 180 mm W (4.1 x 7.1")
Power Consumption: +5 V @1100 mA

Manuais:

Baixar PCI-Bus Digital i/o Board - Hardware Manual

Baixar PCI-Bus Digital i/o Boards - Software Manual