Digital Rotating Torque Sensor, Shaft to Shaft Configuration

TQ514

imagem meramente ilustrativa

No Slip Rings for Quiet, High Speed Operation Up to
10,000 RPM
Amplifed ±5 Vdc Output for Easy Computer Interface
Optional Optical Encoder for Angle or Speed Measurement

Células de Carga - Ver Produtos Relacionados

Descrição

The TQ514 Series use a unique digital, non-contact wireless system to supply power to and transmit the signal from the rotating sensor. The digital torque signal is then converted and amplified to a ±5 Vdc analog signal. This system reduces noise and allows for higher operating speeds. An optional 512 ppr optical encoder is available to measure angle or speed.

SPECIFICATIONS
Excitation Voltage: 12 to 15 Vdc
Supply Current: 350 mA see (PST Series for power supply)
Output at Full Scale: Isolated ±5 Vdc
Sample Rate: 20,000 samples per second
Bandwidth: dc to 1 kHz
Linearity: 0.10% FS
Hysteresis: 0.10% FS
Zero Balance: 1.0% FS
Operating Temperature: -40 to 85°C (-40 to 185°F)
Compensated Temperature: 21 to 76°C (70 to 170°F)
Thermal Effects
   Zero: 0.0036% FS/°C
   Span: 0.0036% FS/°C
Material:
   <100 in-lb: SS shafts, aluminum sensor
   ≥100 in-lb: steel shaft and sensor
Overload Capacity: 150% FS
Maximum Shaft Speed: 10,000 RPM
Electrical Connection: 10-pin twist lockconnector (mating connector supplied)

Produtos Relacionados:

PSS-Series Power Supplies

VER MODELOS E PREÇOS →

Barrier Strip Style Power Supply, Provides Regulated Excitation for Strain Gages and Pressure Transducers