Washdown Duty Stainless Steel 3-Phase AC Motors

WSS Series 1/3 TO 2 HP TEFC Motors

imagem meramente ilustrativa

1/3 to 2 HP, 3600 and 1800 RPM
208 to 230/460 Volt
TEFC Enclosure
1.15 Service Factor
Class F Insulation
56C-Face— Rigid Base and Round Body
Double Lip Seals on Both Ends of the Motor with an Additional Shaft Slinger on the Drive-End
O-Rings Installed on Endbells to Eliminate Moisture
Pre-Installed Watertight, Stainless Cord Connector
Inverter Duty
Suitable for 50 Hz Operation with 1.0 Service Factor

Acionadores e Motores - Ver Produtos Relacionados

Descrição

The WSS Series stainless steel motors are 3-phase industrial grade washdown duty motors made with 300 grade stainless steel housing. These fractional HP motors come in sizes from 1/3 to 2 H.P. and are available with a double reinforced welded 56H base or without a base in the round body style.

Construction:
– Windings double dipped and cured in polyester insulating varnish
– Anti-rust coated rotor to protect against corrosion
– Double-lip shaft seals plus V-ring shaft slingers
– Internal bearing retainer
– Laser-etched full-fact name plates
– Watertight stainless cord connector pre-installed in the split designed conduit box.

Specifications
Voltage: 230/460V, 3 phase 60 Hz—can run on 50 Hz with reduced service factor of 1.0
Frame/Enclosure: 56C/TEFC, 300 grade stainless steel
Rated Speed: 1725/3460
Duty Cycle: Continuous
Base Type: C-face—rigid
Shaft: Keyed, 304 Stainless Steel
Bearings: 6205 DDU
Rotation: CW/CCW

For additional specifications and drawing... see "Specs" above for details.

Produtos Relacionados:

OMDC-ASP10 Digital Closed Loop Controller

VER MODELOS E PREÇOS →

Digital Closed Loop Controller For Use With AC or DC Adjustable Speed Drive Systems

OMDC-PU-E and -R Series

VER MODELOS E PREÇOS →

AC or DC Motor Speed Sensors from 1- 20 pulses per revolution to monitor speed and direction.