DIRECTCONNECT^™ Series Modular Mounting Stanchions Discontinued

DMEX Series

DIRECTCONNECT™ Series Modular Mounting Stanchions

imagem meramente ilustrativa

Extruded Aluminum Beams with T-Slot Design for Quick Assembly
Three Sizes for Use with DIRECTCONNECT™ Base Slides and Thrusters
Gusset Kits Available to Quickly Connect Three Sizes of Mounting Stanchions
Nut Plate and Screw Kits for Mounting Slides and Thrusters
Straightness of 0.33 mm (0.013") per Foot and Flatness of 0.10 mm (0.004") per Inch of Width
Maximum Twist of 6.4 mm (0.25") per Foot
Stock Sizes for Immediately Delivery or Custom Lengths Available
Quickly Assembly to Lower Cost
Wire/Tube Clamps and Slot Covers for Neat and Clean Machine Design
Cross Section Width 38.1 to 152.4 mm (1.50 to 6.0") and Depth 19.1 to 76.2 mm (0.75 to 3.0")
Custom Lengths Available - Consult Automation Sales

Descrição

The DMEX Series Modular Stanchion components has been discontinued. We regret that we do not have a replacement for this series of products
DMEX Mounting Stanchion Components are pre-engineered modular units designed for a simple and sturdy solution for quick assembly of the DIRECTCONNECT™ series pneumatic linear thrister slides. Beams come in three sizes and are connected together at right angles using corner gussets, this design saves valuable design and assembly time. The smaller beams can be attached to the larger beams for additional configurations to fit any need.

The beams are extruded 6063-T6 Aluminum with a clear anodize finish and T-slots that correspond to the mounting patterns of the linear DLT and DLM slides. Gusset kits come with nut plates for easy assembly and the are wire/tube clamps for a neat and clean machine design.

A selection of stock lengths are available for immediate shipping and custom lengths can be ordered to meat your specific needs. Lengths are available up to 90 inches.

See Product Specs for Gussets and other stanchion accessories

SPECIFICATIONS
DMEX-08
Material: 6063-T6 aluminum
Finish: Clear anodize
Weight per/ft: 0.67 lb
Bar Length: 90" ±0.12"
Section Area: 0.60 sq in
Max Twist: 6.4 mm (0.25") per foot
Flatness: 0.10 mm (0.004") per inch of width
Straightness: 0.33 mm (0.013") per foot
Moment of Inertia X: 1.3 mm4 (0.0519"4)
Moment of Inertia Y: 5.32 mm4 (0.2096"4)

DMEX-16
Material: 6063-T6 aluminum
Finish: Clear anodize
Weight per/ft: 2.40 lb
Bar Length: 90" ±0.12"
Section Area: 2.05 sq in
Max Twist: 6.4 mm (0.25") per foot
Flatness: 0.10 mm (0.004") per inch of width
Straightness: 0.33 mm (0.013") per foot
Moment of Inertia X: 21 mm4 (0.8313"4)
Moment of Inertia Y: 83 mm4 (3.278"4)

DMEX-25
Material: 6063-T6 aluminum
Finish: Clear anodize
Weight per/ft: 7.34 lb
Bar Length: 90" ±0.12"
Section Area: 06.25 sq in
Max Twist: 6.4 mm (0.25") per foot
Flatness: 0.10 mm (0.004") per inch of width
Straightness: 0.33 mm (0.013") per foot
Moment of Inertia X: 320 mm4 (12.608"4)
Moment of Inertia Y: 1320 mm4 (52.614"4)

Dimensions

Produtos Relacionados: