Wireless pH and Temperature Transmitter

Descrição

The OM-CP-RFPH101A Series has been discontinued. Please see the UWPH-2A-NEMA-M12 as a possible alternative or contact our Data Acquisition Engineering department.

The OM-CP-RFPH101A is a miniature, wireless, battery powered, stand-alone, pH and temperature transmitter. This all-in-one compact, portable, easy to use device will measure and transmit pH and temperature measurements. When enabled, the wireless transmitter will transmit readings back to the host computer where the data can be analyzed in real time. These readings are also logged to the device’s memory for added data security. The convenient slide switch allows the transmitter to be turned On or Off without affecting the operation of the device. The OM-CP-RFPH101A is a major leap forward in both size and performance. Numerous devices may transmit data to the same receiving station. The Windows software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can also be exported to a text or Microsoft Excel file.

Specifications:
TEMPERATURE CHANNEL
Temperature Sensor: A pH electrode with integral 100Ω Pt RTD temperature sensor
or an external 100Ω Pt RTD temperature sensor is required (a 100Ω resistor may be
used if temperature compensation is not needed)
Measurement Range:
-40 to 125°C (-40 to 257°F); 0 to 500 Ω
Temperature Resolution:
0.01°C (0.001)
Calibrated Accuracy:
+0.1°C @25°C ambient (+0.015)
Input Connection:
Removeable screw-terminal; 2, 3 or 4 wire

pH CHANNEL
pH Range:
0.00 to 14.00 pH
(-1000 to +1000 mV)
pH Resolution: 0.01 pH (0.1 mV)
Calibrated Accuracy:
+0.1pH (+1 mV)
Input Connection: Female BNC jack
Input Resistance: 10 12.typical

GENERAL SPECIFICATIONS
Start Time: Software programmable
start time and date, up to six months in advance
Real Time Recording: May be used with PC
to monitor and record data in real time
Memory: 13107 readings per channel;
26,214 total readings; software configurable memory wrap
Reading Interval:
1 reading every 30 seconds to 1 every 12 hours
Calibration: Digital calibration through software
Data Format: Date and time stamped,
°C, °F, °K, °R, Ω, pH, V, mv,
engineering units specified through software
Time Accuracy: +1 minute/month at 20 to 30°C
Computer Interface: PC serial or RS-232C COM
interface cable required); 57600 baud
RF Baud Rate: 4800 baud
RF Carrier Frequency: 418 MHz
Maximum Output Power:< 0dBm typical (<1mw)
Range: 36.6 m (120') line of sight
Power: 9 V lithium battery included (user replaceable)
Battery Life: 1 year typical
(1 minute reading rate @ 25°C)
Weight: 113 g (4 oz)
Software:XP SP3/Vista and 7 (32-bit and 64-bit)
Operating Environment:
-5 to +50°C (23 to122°F)
5 to 95% RH non-condensing
Dimensions:
114 H x 61 W x 25 mmD + 51 mm antenna
(4.5 x 2.4 x 1.0" + 2.0" antenna)
Weight: (120 g) 4 oz

Manuais:

Produtos Relacionados: