Carrinho  |  Contato  |  Suporte  | 
Atendimento e Vendas 0800-773-2874
e-mail:vendas@br.omega.com

High Performance Stepper Drives With Advanced Features And Control Options

ST Series

Stepper Drives | ST Series

Stepper Drives

imagem meramente ilustrativa

R$2.905,00 ST5-S

1 ano de garantia
  • Current Output 0.5 to 10.0 A
  • Configurable Idle Current Reduction
  • Pulse and Direction
  • Analog Command Signal
  • Serial Commands Via RS232/485/Ethernet
  • Stand-Alone Programming on "Si", "IP", and "Plus" Models
  • Microstepping up to 51,200 Steps per Revolution
  • Fault Protection:
      – Over-Voltage, Under-Voltage
      – Over-Temp
      – External Output Shorts
      – Internal Amplifier Shorts
  • All Models Compatible With Multi-Axis Controller HUB 444
  • Sample Motion Programs Available by Request
Acionadores e Motores - Ver Produtos Relacionados

Descrição

The ST-series high performance stepper drives incorporate advanced features that will derive the highest performance from today’s stepper motors. The Anti-Resonance and Waveform Damping control algorithms make this drive a clear market leader. The "-S" models are step and direction drives, compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series. The "-Si" models are stand-alone programmable drives which are programmed with the simple-to-use Si Programmer software. Both the "-S" and "-Si" models can be controlled by sending serial commands in a simple ASCII format, the Si Command Language (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

Some of the advanced features of the ST-series drives include:

Self Test and Auto Setup: At start-up the drive measures motor parameters, including the resistance and inductance, then uses this information to optimize the system performance. It also compares this information from the last configuration and checks to see if the motor data has changed (this could indicate a fault or system change). The drive can also detect open and short circuits.

Anti-resonance: A disadvantage of the step motor is a tendency to "resonate" at some frequency. By entering some system data this natural frequency can be calculated and a damping term entered into the control algorithm. This significantly improves midrange stability and allows higher speeds and more use of the available torque.

Command Signal Smoothing: Dynamic smoothing can soften the effect of immediate changes in velocity and direction, making the motion of the motor less jerky. An added advantage is that it can reduce the wear on mechanical components.

Torque Ripple Smoothing: All step motors have an inherent low speed torque ripple that can affect the motion of the motor. By analyzing this torque ripple the system can apply a negative harmonic to negate this effect, giving the motor much smoother motion at low speed. br>
Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

Q Programmer
Q Programmer is a text-based single-axis motion control software for "Plus", "Q", and "IP" model stepper drives. The software allows users to create sophisticated and functional programs that Plus, Q, and IP drives can run stand-alone. The commands available in the Q programming environment consist of commands for controlling motion, inputs and outputs, drive configuration and status, as well as math operations, register manipulation, conditional programming, and multi-tasking. Unlike the Si Programmer, some programming experience is recommended to use Q Programmer.

Protect your power supply from motor regeneration with the OMRC-050 regen clamp... see "Specs" above for details.
Ver Modelos e Preços(Especifique o número do modelo)

O que outras pessoas compraram: Quando você vir este ícone, clique nele para expandir a lista de produtos que outras pessoas tenham comprado quando compraram este modelo.

Código de Produto/Desc.
Qtd
Descrição
ST5 Models: 5 Amp drives
Quick Ship
  
ST5-S
R$2.905,00
Disponível em: 4 semanas
 
Performance stepper drive with 5 A/phase output
Quick Ship
  
ST5-Plus
R$3.310,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™
Quick Ship
  
ST5-IP-EN
R$5.765,00
Disponível em: Em estoque
 
Performance stepper drive with Q Programmer™ and Ethernet/IP
Quick Ship
  
ST5-IP-EE
R$6.215,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™ and Ethernet/IP plus encoder input
Quick Ship
  
ST5-Q-EN
R$5.365,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™ and Ethernet
Quick Ship
  
ST5-Q-EE
R$5.810,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™ and Ethernet plus encoder input
Quick Ship
  
ST5-Q-NF
R$5.455,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™ and encoder input/output
Quick Ship
  
ST5-Si
R$4.650,00
Disponível em: 4 semanas
 
Performance stepper drive with Si Programmer™
Quick Ship
  
ST5-Si-ENC
Sob consulta  
Disponível em: 
 
 
Performance stepper drive with Si Programmer™ and encoder input
Quick Ship
  
ST5-Si-485
Sob consulta  
Disponível em: 
 
 
Performance stepper drive with Si Programmer™ and RS485 interface
Quick Ship
  
ST5-Si-ENC-485
Sob consulta  
Disponível em: 
 
 
Performance stepper drive with Si Programmer™ and encoder input plus RS485 interface
Quick Ship
  
ST5-Si-NF
R$5.810,00
Disponível em: 6 semanas
 
Performance stepper drive with Si Programmer™ and encoder input/output
ST10 Models: 10 Amp drives
Quick Ship
  
ST10-S
R$3.845,00
Disponível em: 4 semanas
 
Performance stepper drive with 10 A/phase output
Quick Ship
  
ST10-Plus
R$4.200,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™
Quick Ship
  
ST10-IP-EN
R$6.215,00
Disponível em: Em estoque
 
Performance stepper drive with Q Programmer™ and Ethernet/IP
Quick Ship
  
ST10-IP-EE
R$6.750,00
Disponível em: Em estoque
 
Performance stepper drive with Q Programmer™ and Ethernet/IP plus encoder input
Quick Ship
  
ST10-Q-EN
R$6.260,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™ and Ethernet
Quick Ship
  
ST10-Q-EE
R$6.885,00
Disponível em: 4 semanas
 
Performance stepper drive with Q Programmer™ and Ethernet plus encoder input
Quick Ship
  
ST10-Q-NF
R$5.275,00
Disponível em: Em estoque
 
Performance stepper drive with Q Programmer™ and encoder input/output
Quick Ship
  
ST10-Si
R$5.500,00
Disponível em: 4 semanas
 
Performance stepper drive with Si Programmer™
Quick Ship
  
ST10-Si-ENC
Sob consulta  
Disponível em: 
 
 
Performance stepper drive with Si Programmer™ and encoder input
Quick Ship
  
ST10-Si-485
Sob consulta  
Disponível em: 
 
 
Performance stepper drive with Si Programmer™ and RS485 interface
Quick Ship
  
ST10-Si-ENC-485
Sob consulta  
Disponível em: 
 
 
Performance stepper drive with Si Programmer™ and encoder input plus RS485 interface
Quick Ship
  
ST10-Si-NF
R$6.035,00
Disponível em: 6 semanas
 
Performance stepper drive with Si Programmer™ and encoder input/output
RECOMMENDED MOTORS FOR ST5 MODELS
Quick Ship
  
OMHT17-075
R$695,00
Disponível em: 10 semanas
 
NEMA 17, 62.8 oz-in holding torque
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comOMHT17-275
OMHT17-275
R$465,00
Disponível em: Em estoque
 
NEMA 17, 62.3 oz-in holding torque
Quick Ship
  
OMHT17-278
R$550,00
Disponível em: 2 semanas
 
NEMA 17, 113 oz-in holding torque
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comOMHT23-397
OMHT23-397
Sob consulta  
Disponível em: 
 
 
NEMA 23, 177 oz-in holding torque
Quick Ship
  
OMHT23-597
R$610,00
Disponível em: 10 semanas
 
NEMA 23, 177 oz-in holding torque
Quick Ship
  
OMHT23-400
Sob consulta  
Disponível em: 
 
 
NEMA 23, 264 oz-in holding torque
Quick Ship
  
OMHT23-600
R$990,00
Disponível em: 4 semanas
 
NEMA 23, 264.8 oz-in holding torque
Quick Ship
  
OMHT24-100
R$680,00
Disponível em: 4 semanas
 
NEMA 24, 123 oz-in holding torque
Quick Ship
  
OMHT24-105
R$770,00
Disponível em: 4 semanas
 
NEMA 24, 177 oz-in holding torque
Quick Ship
  
OMHT24-108
R$1.370,00
Disponível em: 4 semanas
 
NEMA 24, 354 oz-in holding torque
RECOMMENDED MOTORS FOR ST10 MODELS
Quick Ship
  
OMHT23-603
R$1.125,00
Disponível em: 4 semanas
 
NEMA 23, 354 oz-in holding torque
Quick Ship
  
OMHT24-100
R$680,00
Disponível em: 4 semanas
 
NEMA 24, 123 oz-in holding torque
Quick Ship
  
OMHT24-105
R$770,00
Disponível em: 4 semanas
 
NEMA 24, 177 oz-in holding torque
Quick Ship
  
OMHT24-108
R$1.370,00
Disponível em: 4 semanas
 
NEMA 24, 354 oz-in holding torque
Quick Ship
  
OMHT34-504
R$1.020,00
Disponível em: 4 semanas
 
NEMA 34, 396 oz-in holding torque
Quick Ship
  
OMHT34-485
R$2.595,00
Disponível em: Em estoque
 
NEMA 34, 650 oz-in holding torque
Quick Ship
  
OMHT34-505
R$1.405,00
Disponível em: Em estoque
 
NEMA 34, 849 oz-in holding torque
Quick Ship
  
OMHT34-486
R$3.350,00
Disponível em: 4 semanas
 
NEMA 34, 1200 oz-in holding torque
Quick Ship
  
OMHT34-506
R$1.950,00
Disponível em: Em estoque
 
NEMA 34, 1260 oz-in holding torque
Quick Ship
  
OMHT34-487
R$4.515,00
Disponível em: Em estoque
 
NEMA 34, 1845 oz-in holding torque
Accessories
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comOMPS150A24
OMPS150A24
R$1.055,00
Disponível em: 4 semanas
 
Stepper drive power supply for ST series,  24 VDC, 6.3A
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comOMPS300A48
OMPS300A48
Sob consulta  
Disponível em: 
 
 
Stepper drive power supply for ST series, 48 VDC, 6.7A
Quick Ship
  
HUB 444 DIN RAIL
Sob consulta  
Disponível em: 
 
 
Multi-axis network hub with DIN rail mounting kit
Quick Ship
  
MMI-01
Sob consulta  
Disponível em: 
 
 
Operator Interface
Quick Ship
  
OMRC-050
R$1.485,00
Disponível em: Em estoque
 
Motor regeneration clamp
Quick Ship
  
Power Cord-SE
R$57,00
Disponível em: Em estoque
 
AC Power cord with stripped end termination
Quick Ship
  
Power Cord-SE-M16
R$77,00
Disponível em: Em estoque
 
8' Power cord with M16 cable gland strain relief, 3x16 AWG, 250Vac max.
Quick Ship
  
OMBOB-1
Sob consulta  
Disponível em: 
 
 
Breakout box for I/O connector
Quick Ship
  
ENC-ST-CA-10
Sob consulta  
Disponível em: 
 
 
Encoder cable for ST drive, 3 m (10')
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comOM-CONV-USB
OM-CONV-USB
R$169,00
Disponível em: Em estoque
 
USB to RS-232 Interface Converter; USB-A to DB9-male
Quick Ship
Clique para expandir / minimizar uma lista do que os outros compraram comOM-PL-USBS
OM-PL-USBS
R$445,00
Disponível em: 1 semana
 
USB to RS232 converter; works with Windows Vista and Windows 7.
Quick Ship
  
OMG-USB-485-1
R$1.145,00
Disponível em: Em estoque
 
USB to RS-422/485/530 Interface Converter; USB-A to DB25-male
Quick Ship
  
OMG-CA175
R$90,00
Disponível em: 6 semanas
 
DB25F/9M cable (DB9 RS-422 pinout)
Quick Ship
  
SI-PROG-CBL
R$169,00
Disponível em: Em estoque
 
Replacement programming cable (comes with drive)
Quick Ship
  
DRIVE-CBL
Sob consulta  
Disponível em: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
Quick Ship
  
DSUB-9-MF
Sob consulta  
Disponível em: 
 
 
DIN rail interface module, 9-pin
Quick Ship
  
DSUB-25-MF
Sob consulta  
Disponível em: 
 
 
DIN rail interface module, 25-pin
Quick Ship
  
DSUB-9-MF-CBL
R$251,00
Disponível em: Em estoque
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
Quick Ship
  
DSUB-25-MF-CBL
R$187,00
Disponível em: 6 semanas
 
DSUB cable, 25-pin, 2 m (6.6'), male/female connectors
Preços indicados em Reais e já incluem todos os impostos e taxas de acordo com a legislação vigente. Nota: Programming/serial configuration cable included. Programming/configuration software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Exemplo de Pedido: (1) OM-CONV-USB USB to RS-232 Interface Converter, R$169,00  plus (1) OMHT17-275 NEMA 17 high torque step motor, R$465,00  plus (1) ST5-SI performance stepper drive, R$4.650,00, R$169,00 + 465,00 + 4.650,00 = R$5.284,00

Manuais:

Baixar ST5/10-S Series - Stepper Drives
Baixar ST5/10-Q-Si-IP - Stepper Drives
Baixar STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives

Software:

Baixar Si Programmer software and manual
Baixar ST Series Configurator Software
Baixar Q Programmer software for programmable stepper drives